Skip to content

Releases

Images are published on the project's GitHub Releases page. Every release is built by the build workflow in the repository, from the sources pinned in the release tag.

A tag v<version> builds the images into a draft release, where they can be checked first. The release is published by hand, and that publish is also what tells this site (and the update notice in LuCI) that the version exists.

Versions

A version looks like 25.12.5-rc1: the OpenWrt base (25.12.5) and the stage.

Stage Meaning
-rc1, -rc2 ... release candidates. They are the testing series.
-rc1.1 ... a fix after the candidate was published
-R1, -R2 ... stable releases of the base. -R1 is the first of them.
no suffix (25.12.5) reserved: a base update carries the new OpenWrt version

What a release contains

File What it is
cleanwrt-<version>-qualcommax-ipq807x-arcadyan_aw1000-squashfs-sysupgrade.bin the permanent image, installed with sysupgrade
…-initramfs-uImage.itb a boot-in-RAM image, used for the very first install from the stock firmware
…-squashfs-factory.ubi the raw UBI image
*.manifest every package in the image with its version
profiles.json machine-readable image description (also used by the LuCI update check)
sha256sums, sha256sums.cw checksums of the images and of the provenance files
provenance.tar.gz the full build .config, the seed, the pinned feed list, the local package pins and the exact source commits

Verify before you flash

Always check the checksum. A corrupted image is the most common cause of a bad flash.

sha256sum -c sha256sums.cw --ignore-missing
Get-FileHash .\cleanwrt-*-sysupgrade.bin -Algorithm SHA256
# compare with the matching line in sha256sums.cw

Check the model too

The filename must contain arcadyan_aw1000. Never flash an image built for another device or another flash layout.

Update notice in LuCI

The Status → Overview page can tell you when a newer CleanWRT is published. It reads a small file on the project site, so it needs internet access. You can switch it off any time with Stop showing upgrade alerts. The check never installs anything.

Reproducing a release

The release tag, configs/arcadyan_aw1000.seed, feeds.conf.default, configs/local-packages.pin and patches/ are the complete input. See Build from source.

Common questions

Where can I download CleanWRT for the Arcadyan AW1000?

From the project's GitHub Releases page. Each release has the sysupgrade image, the initramfs image for a first install, a package manifest, checksums and a provenance bundle.

How do I check the checksum of the image before flashing?

On Linux or macOS run sha256sum -c sha256sums.cw --ignore-missing in the folder with the files. On Windows use Get-FileHash in PowerShell and compare the value with the matching line. A corrupted image is the most common cause of a bad flash.

What does rc1 mean in a CleanWRT version?

It is a release candidate: the testing series before a stable release. In 25.12.5-rc1, 25.12.5 is the OpenWrt base and rc1 is the first candidate. A suffix such as rc1.1 is a fix published after the candidate.