Glossary¶
Words the rest of this site uses without stopping to define them. Each entry says where you meet it on the router.
Telephone¶
| term | meaning | where it appears |
|---|---|---|
| FXS | the Foreign Exchange Station side: the port that supplies line power and ringing to a telephone, which is what an RJ11 socket on a router is | the kernel module's name, kmod-awvoice-fxs |
| SLIC | Subscriber Line Interface Circuit — the chip that creates the line: its voltage, its ringing, its loop current, and the hook state it reports | the handset, the line test |
| loop current | the direct current that flows through a handset's microphone loop while it is off hook. Its absence means no phone is connected | Health → Line |
| hook | on hook = the handset is down; off hook = it is lifted. Everything else follows from that | the line's states |
| hook flash | a very short break in the loop, made by the handset's R key. Between the two configured windows it counts as a flash rather than as hanging up | hook-flash codes |
| DTMF | the dual-tone keypad signals: the beeps a touch-tone phone sends | dialling, and the caller-id variant named after it |
| FSK | the frequency-shift signalling most European and many modern handsets use to receive a caller-id message | cid |
| caller id | the number (and, here, only the number) sent to the handset's display between or after ring bursts | caller id |
| CLIR | Calling Line Identification Restriction: asking the network not to show your number | the numbers you do not show |
| ring cadence | the on/off pattern of the ringing voltage. Here 2000 ms on, 4000 ms off | the ring test |
| ring trip | the chip's detector for an actual lift during ringing. A phone whose ringer draws too much can fire it before anyone lifts | the log line the chip's ring trip fired before any lift |
| recall | the network offering a held call back to you when you hang up. Lift the handset and the call is yours again | Recall |
| three-way join | two calls and this line in one conversation, made with a flash and 3 |
conference |
| PCM | Pulse Code Modulation — the digital audio path between the modem and the line chip, organised into time slots | how it works |
| PCM slave mode | the modem's audio timing driven by the bus rather than generating it. The phone port needs it and reports whether it is set | Health → Modem |
| HD voice | wideband audio, 16 kHz instead of 8 kHz | hd, and the three health fields that show wish, answer and layout |
Cellular¶
| term | meaning | where it appears |
|---|---|---|
| VoLTE | Voice over LTE: the call carried as data on the 4G/5G network. Without it there is no voice on this line | what you need for the phone port |
| IMS | the IP Multimedia Subsystem — the part of the network that carries VoLTE. Its registration is what the page shows as VoLTE registered | Health |
| RAT | Radio Access Technology: which radio the modem is actually on — sa, nsa, lte, 3g |
the 5G lamp |
| SA / NSA | 5G Standalone (its own core) and Non-Standalone (5G radio anchored on LTE). Solid blue and solid green on the panel | the 5G lamp |
| RSRP | Reference Signal Received Power, in dBm — the honest signal measure | the signal lamp, the page's signal bars |
| CSQ | the older, coarser signal quality number, 0–31. Used only when RSRP is missing | the signal thresholds |
| CEREG | the AT command that answers whether the modem is registered. Its stat values decide the signal lamp's flashing red |
the LED daemon |
| CGNAT | Carrier-Grade NAT: your operator shares one public address among many customers, so nothing can reach your router from outside | remote access |
| APN | Access Point Name: the network name your SIM dials to get data | QModem |
| TTL | Time To Live, the hop counter in every packet. This image can rewrite forwarded packets to a fixed 64 | the 5G modem |
SIP and the network phone¶
| term | meaning | where it appears |
|---|---|---|
| SIP | the signalling protocol that sets up a VoIP call. It carries no voice itself — RTP does | network phones |
| UAC / UAS | User Client / User Server: which side of a dialog sent the request. A BYE has to be built by the right one, which is why a hang-up needed fixing | the SIP patches |
| INVITE, ACK, BYE, CANCEL | the four requests a call is made of: propose, confirm, end, give up | what this build changes upstream |
| 487 | the answer that means "your CANCEL arrived in time" | the same |
| dialog | an established call relationship between two endpoints, identified by tags | the in-dialog authentication note |
| realm | the name a SIP challenge is issued under, which the phone uses with its password to compute a hash | the account card |
| RTP | the media stream: the actual voice packets, in a port range | rtp_start, rtp_end |
| registration | a phone telling the server where it is, refreshed every interval | the outbound card |
| provisioning | a phone fetching a file that configures it. Here: one URL in a QR code | the code a phone scans |
| WebSocket | a long-lived, full-duplex conversation over one HTTP upgrade. The browser phone's audio travels on one | the web phone |
| front end | whatever holds the line's audio at a moment: the handset, the greeting, a network phone, or the browser page | how it works |
| DND / quiet hours | not ringing for a call that arrived. Here it is a schedule with three modes | quiet hours |
Router and OpenWrt¶
| term | meaning | where it appears |
|---|---|---|
| OpenWrt | the Linux distribution this firmware is built from | everywhere |
| LuCI | OpenWrt's web interface, which the AWvoice and LED pages are part of | the pages |
| uci | the configuration layer: files in /etc/config/, read and written with uci |
UCI options |
| ubus | the local message bus services use to answer questions and take orders | the API |
| rpcd | the ubus service that provides uci, file, session — and the plugins this site's pages call |
the same |
| ACL (rpcd) | the grant that says which ubus methods and which config packages a logged-in user may touch. Snapshotted at login | the permissions table |
| procd | the init system that starts services, restarts them on failure, and reloads them on a config trigger | files and ports |
| uci-defaults | first-boot scripts that write defaults once and delete themselves | first-boot defaults |
| sysupgrade | the flash-the-whole-image command. With -v it keeps settings, with -n it does not |
installation |
| keep.d | a package's list of paths that a keep-settings sysupgrade must carry across | files and ports |
| conffile | a configuration file owned by a package, kept on upgrade | first-boot defaults |
| apk | the package manager in OpenWrt 25.12, which is what installs and upgrades packages here | updating |
| feed | a package source. This build pins five of them to exact commits | building |
| MTD / PEB | the flash partitions, and the erase blocks they are made of. The image must fit the layout | MTD layout |
| UBI | the layer that turns erase blocks into volumes. Its arithmetic is what the release gate checks | the same |
| initramfs | an image that runs entirely in memory, used for the first install from stock firmware | installation |
| UART / serial console | the four wires that get you into the bootloader when nothing else works | UART guide |
| TFTP | the trivial file protocol the bootloader can fetch an image from | recovery |
| failsafe mode | a boot state with a fixed IP and no configuration, reached from the bootloader | the same |
| nftables / fw4 | the firewall. Rules here are installed as /etc/nftables.d/ fragments |
security |
| SQM / bufferbloat | queue management that keeps latency down when the link is full | VPN and proxies |
| mDNS | the local name advertisement a printer or a share announces itself with | storage and NAS |
| captive portal | a network that intercepts your first request with a login page. The internet probe is designed to detect it | LEDs |