Monitoring¶
| What | Where |
|---|---|
| Data usage on metered 5G | Statistics → vnStat: daily and monthly totals on the modem interface (already tracked) |
| Live bandwidth per host | Tools → Bandwidth Monitor |
| Signal and network details | Modem → 3gInfo-lite |
| System logs | Status → System Log (or logread over SSH) |
Ad blocking¶
Adblock is installed but off by default. Open Services → Adblock, tick Enabled, pick a blocklist and press Save & Restart (not only Save & Apply). Use Adblock or AdGuard Home, not both.
Watchcat¶
Tools → Watchcat is installed but has no rule, so it does nothing until you add one. The 5G modem already re-dials on its own, so add a rule only if you want a whole-router or an interface watchdog.
Quality of service¶
Network → SQM QoS is installed and inert. Set your interface and your real bandwidth to fight bufferbloat. BBR congestion control is already on, which suits cellular links.
Command line diagnostics¶
cw-diag collects a redacted diagnostic capture:
cw-diag <modem|qmi-rx|nss|wifi|bridge|sysup|full>
The output goes to /var/log/cw-diag-<subsystem>-<time>.log. SIM identifiers, public IPs and
Wi-Fi keys are redacted. Also installed: htop, mtr, iperf3, ethtool, usbutils.
Out of the box¶
| tool | state | where |
|---|---|---|
| vnStat 2 | on | Statistics → vnStat. Daily and monthly totals per interface |
| Bandwidth Monitor (nlbwmon) | on | Tools → Bandwidth Monitor. Traffic per device |
| Adblock | off | Services → Adblock. Its init script is enabled but exits at once while adb_enabled='0', so the checkbox on the page is the only switch |
| Watchcat | no rule at all | Tools → Watchcat. Deliberate: the package default is an active "ping, reboot after 6 failures" rule, and this image ships the file with the sections removed |
| SQM QoS | off | Network → SQM QoS |
irqbalance |
on | no page. Interrupts spread over the four cores |
| packet steering | on | network.globals.packet_steering='1', written by 97-cw-net-tuning |
cw-diag |
always available | a shell command, below |
What is listening¶
Nothing on this page opens a port by itself. Adblock binds the DNS port only when enabled, and bandwidth monitoring and vnStat read netlink and the interface counters rather than listening.
When it does not work¶
| symptom | what it means |
|---|---|
| vnStat shows no history | the database is in /var/lib/vnstat, which is on flash. A keep-settings upgrade keeps it; a clean install does not |
| The ad-block list never loads | the feeds are fetched at start. logread -e adblock says whether the download failed or the checkbox is off |
| The router rebooted itself | it did not, unless you added a Watchcat rule. This image ships Watchcat with no rule precisely so that cannot happen by default |
| Bandwidth Monitor shows nothing for the modem interface | it counts per interface. The modem's data interface is wwan0 |
Questions people ask¶
Does CleanWRT reboot the router when 5G drops?
Not as shipped. OpenWrt's Watchcat is the tool that would, and its package default is exactly that rule; this image installs Watchcat with no rule configured, so nothing reboots until you write one.
How do I collect a diagnostic report from the router?
cw-diag full. It redacts SIM identifiers, public addresses and Wi-Fi keys, which is what makes
it safe to attach to a report.
Can I block ads on the whole network?
Yes, with Adblock or AdGuard Home — one of them, not both. Both are installed; both are off. See apps with their own web interface.