What is included¶
CleanWRT is vanilla OpenWrt 25.12.5 plus the apps below. Everything else in the firmware is stock OpenWrt. For the complete, generated list of selected packages see Full package list.
Apps marked Off are installed but do nothing until you turn them on: open the page named in the table, tick Enable and press Save & Apply. Every one of them has this same single switch.
| App | Where in LuCI | Out of the box | What it is for |
|---|---|---|---|
| AWvoice | Services → AWvoice(RJ11) | On | phone calls on the RJ11 port, in the browser, or from a soft phone (the phone port) |
| QModem (+ SMS, TTL) | Modem | On | 5G modem control, SMS, TTL tools |
| 3ginfo-lite | Modem → 3gInfo-lite | On | SIM, signal and neighbour cells (the radio page) |
| sms-forwarder | part of QModem | On | forwards received SMS |
| SIP service for the phone port | no page of its own — the switch is on AWvoice → SIP | Off until the AWvoice SIP switch turns it on | a soft phone on your own network rings and dials through the SIM's line; off means no port is open (AWvoice) |
| Passwall | Services → PassWall | Off (configure servers) | proxy / bypass suite |
| Passwall 2 | Services → PassWall 2 | Off (configure servers) | proxy / bypass suite (v2) |
| HomeProxy | Services → HomeProxy | Off | sing-box based proxy |
| WireGuard | Network → Interfaces | needs a tunnel from you | VPN protocol support |
| OpenVPN | VPN → OpenVPN | Off (needs your .ovpn file) | VPN client and server |
| Tailscale | Services → Tailscale | needs your login | mesh VPN |
| Cloudflare Zero Trust Tunnel | Services → Cloudflare Zero Trust Tunnel | Off | publish a service without a public IP |
| Adblock | Services → Adblock | Off | DNS ad blocking |
| Watchcat | Tools → Watchcat | no rule at all, deliberately | reboot or restart an interface when the connection is lost. The package default would reboot a router on its own; this image ships it empty |
| AdGuard Home | Services → AdGuard Home | Off | DNS filtering with its own dashboard (web apps) |
| Disk Manager | Services → Disk Manager | On | partition and format USB drives |
| HDD Idle | Tools → HDD Idle | Off | spin down a USB hard disk |
| Network Shares (Samba) | Network → Filesystem Share | the daemon starts; the share allows no guest access | Windows / macOS / Linux file sharing, one share of /mnt |
| miniDLNA | Services → miniDLNA | Off | media server for TVs and players |
| Syncthing | Services → Syncthing | Off | folder sync with your phone and PC (web apps) |
| qBittorrent | Services → qBittorrent | Off | download client with its own web interface (web apps) |
| File Manager | Tools → File Manager | On | browse and edit router files |
| Printer server (p910nd) | Services → p910nd | Off | share a USB printer |
| Bandwidth Monitor | Tools → Bandwidth Monitor | On | traffic per device |
| vnStat | Statistics → vnStat | On | traffic history, monthly totals |
| SQM QoS | Network → SQM QoS | Off (set your speeds) | fix bufferbloat |
| Web terminal (ttyd) | Tools → Terminal | On | a shell in the browser |
| Footstrap theme | System → Footstrap | On | the default look (theme) |
| LED Management | System → LED Management | On | front-panel LEDs (LEDs) |
| New-version notice | Status → Overview | On | tells you when a newer CleanWRT is published (releases) |
| Quiet hours, recordings, the answering machine | inside AWvoice → Rules and Phone settings | all off until you write them | quiet hours, recordings and the machine |
Core and system¶
| Package | Role |
|---|---|
luci and the luci-mod-* set |
web admin UI |
dnsmasq-full |
DNS and DHCP server |
firewall4 / nftables |
firewall and NAT |
kmod-ath11k and wpad |
Wi-Fi |
kmod-qca-nss-dp, kmod-qca-ssdk |
Ethernet data plane |
irqbalance, zram-swap, packet steering |
spreads load over the four cores |
| BBR congestion control | good for cellular links |
Command line tools¶
bash, htop, nano, jq, curl, openssl-util, openssh-sftp-server, ethtool-full,
mtr-json, iperf3, usbutils, and cw-diag (see Monitoring).
Where the defaults come from¶
Every state in the Out of the box column is written by a package default or by one of the image's thirteen first-boot scripts, and both are listed in first-boot defaults. The option values themselves are in UCI options.
Need something else?¶
The official OpenWrt package repositories are enabled, so apk add <name> works (for example
apk add mwan3 luci-app-mwan3). Packages you add yourself are yours to manage. See
Extra packages.
IPv6 and proxies¶
The 5G connection is dual-stack when your carrier offers IPv6. If you send traffic through Passwall 2, enable IPv6 TProxy in its forwarding settings. To use IPv4 only, set the modem's PDP type to IPv4 in Modem → QModem.