Skip to content

USB storage and NAS

Plug in a USB drive and it auto-mounts under /mnt (ext4, FAT, exFAT and NTFS). Manage mounts in System → Mount Points.

Prepare a drive in the browser

Services → Disk Manager creates partition tables (GPT or MBR), partitions and formats (ext4, FAT32, exFAT, NTFS, btrfs), and shows disk health (SMART, including USB-NVMe enclosures).

Mounts made in Disk Manager are live only

Set the boot-time mount in System → Mount Points afterwards so the drive is there after every reboot. The smartd daemon ships disabled; the UI only uses the smartctl command.

NAS services (all opt-in)

Everything below ships installed but disabled and is pointed at the USB drive. Nothing listens on the LAN until you enable it. Set credentials before you enable each service.

Service Where Notes
Network file share (SMB) Network → Filesystem Share serves all of /mnt as \\192.168.1.1\USB; guest access is off
Torrents (qBittorrent) Services → qBittorrent web UI on :8080; downloads go to /mnt/download
Folder sync (Syncthing) Services → Syncthing web UI on :8384
Media server (miniDLNA) Services → miniDLNA DLNA on the LAN only, port 8200
Printer share (p910nd) Services → p910nd raw port 9100 and mDNS
Web file manager Tools → File Manager browse, edit, upload, delete, hex editor
Drive spin-down Tools → HDD Idle for USB hard disks

More download clients are available from the official repositories:

apk add transmission-daemon transmission-web luci-app-transmission
apk add aria2 luci-app-aria2

Plug a drive in before you download

Downloads default to the first USB drive (/mnt/sda1). With no drive attached they would fill the router's small internal flash. Do not start downloads without a drive.

Streaming to a TV or phone (DLNA)

  1. Plug in a drive with media.
  2. Enable Services → miniDLNA; it scans /mnt.
  3. Smart TVs (Samsung, LG, Sony), VLC, Kodi, phone apps and a PS4/Xbox see the server on the LAN.

For a very large library, point the database directory at the drive (miniDLNA → Advanced), so it does not re-scan on every reboot.

PlayStation 5

The PS5 has no built-in DLNA player. Use an app such as Plex on it.

Common questions

Can I use a USB drive as a NAS on the Arcadyan AW1000?

Yes. A drive auto-mounts under /mnt (ext4, FAT, exFAT and NTFS), and you can share it with SMB, DLNA, Syncthing and qBittorrent. All of these ship installed but disabled, so set credentials before you enable them.

Can the AW1000 stream media to a smart TV?

Yes. Enable miniDLNA with a drive of media attached. Smart TVs, VLC, Kodi and phone apps on the LAN will see the server. A PlayStation 5 has no built-in DLNA player, so use an app such as Plex there.

Why should I plug a drive in before downloading?

Downloads default to the first USB drive. With no drive attached they would fill the router's small internal flash.

Out of the box

state what it means
block-mount on, anon_mount='1', auto_mount='1', delay_root='5', check_fs='0' a drive plugged in appears under /mnt within seconds, with no swap taken and no filesystem check at boot
Samba the daemon starts there is one share, USB → /mnt, writable, with guest_ok='no' — so nothing is reachable until you add users. The package's init script has no enabled switch, which is why the daemon is running
miniDLNA off (enabled='0') when on: port 8200 on br-lan, media from /mnt, database in /var/run/minidlna, name CleanWRT
Syncthing off when on, its own interface on 0.0.0.0:8384 and its config in /etc/syncthing
qBittorrent off downloads default to the first USB drive
p910nd (printer) off when on, /dev/usb/lp0, advertised over mDNS as CleanWRT USB printer
hd-idle off spin-down for a USB hard disk
smartd not in the image deliberately
Transmission not in the image qBittorrent covers the same job; the package is in the official feed if you want it

What is listening

port what default state
139, 445 Samba open on the LAN, but the share refuses guest access
8384 Syncthing's web interface off. When enabled it binds all addresses, so set a password first
8200 miniDLNA off
515 p910nd off
8080 qBittorrent's own interface off until the app is enabled

When it does not work

symptom what it means
The share asks for a password you do not have guest_ok='no' and no users defined. Add one in Network → Filesystem Share
A new drive is not visible mounts made inside Disk Manager are live only; add a real mount point, or plug the drive in before boot
Downloads filled the flash the download directory defaults to the first USB drive. With no drive plugged in it falls back somewhere small. Plug one in first
The TV sees no media miniDLNA is off by default, and its media_dir is /mnt
Syncthing's page is unreachable its config section must be named syncthing; a section named main is silently ignored by the init script

Questions people ask

Can I use a USB drive as a NAS on the Arcadyan AW1000?

Yes, and it is the only place this router has room. Samba serves /mnt as one writable share with guest access off, so it is private until you add users.

Can the AW1000 stream media to a smart TV?

With miniDLNA switched on: port 8200 on the LAN bridge, scanning /mnt, announcing itself as CleanWRT.