CleanWRT: OpenWrt firmware for the Arcadyan AW1000 5G router
An open build of OpenWrt 25.12 for the AW1000 with a working RJ11 phone port (AWvoice), a modern interface (Footstrap), LEDs that mean something, and the usual power tools, all off until you ask. Built in the open on GitHub.
Projects
CleanWRT firmware
OpenWrt 25.12 for the AW1000 with 5G, a phone port and optional tools.
Documentation · SourceAWvoice phone port
Plug an ordinary desk phone into the RJ11 socket and make and take calls over your SIM (VoLTE): caller id, hold, a call log, recordings, an answering machine and quiet hours. The router's web page is a telephone too, and a soft phone on your own network can join the same line.
Guide · SourceThe web interface
Footstrap is the default look: dark or light, top bar or sidebar, and a narrow-screen layout. Argon and Alpha ship beside it to compare.
Details · DocumentationLED management
Drives the front-panel LEDs from live modem and network state, with a night mode. Works on OpenWrt on its own.
Details · SourceWhat you get on the Arcadyan AW1000
- Phone on the router. Caller id, call waiting, hold, call log, speed dial, call recordings, an answering machine and quiet hours.
- No handset required. The web page is the handset, and a soft phone on your own network calls through the same SIM line.
- 5G that recovers by itself. QModem, auto-dial, dual-stack IPv4/IPv6, SMS, TTL control.
- A modern interface. Footstrap by default, dark or light, usable from a phone.
- LEDs that mean something. 5G SA or NSA, signal quality, a real internet check, night mode.
- Tools, off by default. Passwall, WireGuard, OpenVPN, Tailscale, AdGuard Home and more.
- Verifiable builds. Built on GitHub Actions from pinned sources, with checksums.
Get started
- Check your flash layout. The image needs the expanded layout.
- Install OpenWrt on the AW1000 with UART and TFTP, then update with sysupgrade.
- First boot, then set up the 5G modem and the phone port.
- Recover the router if something goes wrong.
Frequently asked questions
What is CleanWRT?
CleanWRT is an open build of OpenWrt 25.12 for the Arcadyan AW1000 5G router (Qualcomm IPQ8072, Quectel RG500Q-EA modem). It adds a working RJ11 phone port (AWvoice), the Footstrap interface theme, front-panel LED management and a set of optional tools that stay off until you enable them.
Does OpenWrt run on the Arcadyan AW1000?
Yes. CleanWRT is OpenWrt 25.12.5 built for the AW1000. The image needs the expanded flash layout (the rootfs partition must be at least 0x08000000), so check /proc/mtd on your router before you flash. The documentation explains how.
Can I use a normal phone on the AW1000 RJ11 port?
Yes, with AWvoice. An ordinary desk phone on the RJ11 socket makes and takes calls over your SIM using VoLTE, with caller id, call waiting, hold, a three-way join, a call log, speed dial, call recordings and an answering machine. The modem must be in PCM slave mode, and the phone port is not meant for emergency calls.
How do I install CleanWRT on the AW1000?
The first install from the stock firmware needs a serial console (UART) and a TFTP server. Once the router runs OpenWrt, later updates use sysupgrade. Read the installation and recovery guides before you start.
Is CleanWRT free?
Yes. The build configuration, patches and scripts are GPL-2.0-only and free of charge. Bundled packages keep their own licences; QModem carries an added non-commercial clause, so read it before any business or paid use.
Is CleanWRT affiliated with the OpenWrt project?
No. CleanWRT is an independent build, powered by OpenWrt, and is not affiliated with or endorsed by the OpenWrt project.
How do I recover an Arcadyan AW1000 that will not boot?
If the router boots but you cannot reach it, use failsafe mode over Ethernet. If it is stuck at the bootloader, use the serial console to boot an initramfs image over TFTP and flash again. The recovery guide walks through both.
Where do I download the AW1000 firmware and how do I check it?
Images are on the GitHub Releases page of the CleanWRT project. Verify the file with sha256sum against the published checksums and make sure the file name contains arcadyan_aw1000 before you flash.
Does the phone port work with nothing plugged into the RJ11 socket?
Yes. With the socket empty the router's web page is the handset: dial, answer, hang up, mute and send DTMF from the browser. A soft phone on your own network can also register to the router and call through the same SIM line, beside the handset when one is connected. Quiet hours hold the handset, the answering machine and the network phones off a ringing call for windows of the day you set.
Can the AW1000 record phone calls?
Yes, once you switch recording on. Each answered call is kept on the router as a stereo WAV with the caller and this side on separate channels, in a folder with a size budget that removes the oldest, and it is played from that call's card in the log. An unanswered call can hear your greeting and leave a message instead. Nothing leaves the router and no file name carries a phone number. Recording a conversation is regulated in many places, so check what applies where you connect it.
Does the phone stay quiet at night?
It can. Quiet hours take up to eight windows of the day, each one silent, sent to the answering machine, or rejecting the caller, with numbers that ring through regardless and the *78 and *79 codes on the handset or the page.
Does CleanWRT have a dark mode?
Yes. The web interface is dark by default, with light and auto modes, a choice you can save per browser as well as one saved on the router, and a narrow-screen layout for a phone.
Can the AW1000 fail over to another connection when 5G drops?
Yes, with mwan3: add a phone USB tether, a USB modem or an Ethernet adapter as a second connection and let the router switch when the 5G link drops.